404 - PAGE NOT FOUND
ERROR 404 - PAGE NOT FOUND

Why am I seeing this page?

404 means the file is not found. If you have already uploaded the file then the name may be misspelled or it is in a different folder.

Other Possible Causes

You may get a 404 error for images because you have Hot Link Protection turned on and the domain is not on the list of authorized domains.

If you go to your temporary url (http://ip/~username/) and get this error, there maybe a problem with the rule set stored in an .htaccess file. You can try renaming that file to .htaccess-backup and refreshing the site to see if that resolves the issue.

It is also possible that you have inadvertently deleted your document root or the your account may need to be recreated. Either way, please contact your web host immediately.

Are you using WordPress? See the Section on 404 errors after clicking a link in WordPress.

How to find the correct spelling and folder

Missing or Broken Files

When you get a 404 error be sure to check the URL that you are attempting to use in your browser.This tells the server what resource it should attempt to request.

http://example.com/example/Example/help.html

In this example the file must be in public_html/example/Example/

Notice that the CaSe is important in this example. On platforms that enforce case-sensitivity example and Example are not the same locations.

For addon domains, the file must be in public_html/addondomain.com/example/Example/ and the names are case-sensitive.

Broken Image

When you have a missing image on your site you may see a box on your page with with a red X where the image is missing. Right click on the X and choose Properties. The properties will tell you the path and file name that cannot be found.

This varies by browser, if you do not see a box on your page with a red X try right clicking on the page, then select View Page Info, and goto the Media Tab.

http://example.com/cgi-sys/images/banner.PNG

In this example the image file must be in public_html/cgi-sys/images/

Notice that the CaSe is important in this example. On platforms that enforce case-sensitivity PNG and png are not the same locations.

404 Errors After Clicking WordPress Links

When working with WordPress, 404 Page Not Found errors can often occur when a new theme has been activated or when the rewrite rules in the .htaccess file have been altered.

When you encounter a 404 error in WordPress, you have two options for correcting it.

Option 1: Correct the Permalinks

  1. Log in to WordPress.
  2. From the left-hand navigation menu in WordPress, click Settings > Permalinks (Note the current setting. If you are using a custom structure, copy or save the custom structure somewhere.)
  3. Select  Default.
  4. Click Save Settings.
  5. Change the settings back to the previous configuration (before you selected Default). Put the custom structure back if you had one.
  6. Click Save Settings.

This will reset the permalinks and fix the issue in many cases. If this doesn't work, you may need to edit your .htaccess file directly.

Option 2: Modify the .htaccess File

Add the following snippet of code to the top of your .htaccess file:

# BEGIN WordPress
<IfModule mod_rewrite.c>
RewriteEngine On
RewriteBase /
RewriteRule ^index.php$ - [L]
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule . /index.php [L]
</IfModule>
# End WordPress

If your blog is showing the wrong domain name in links, redirecting to another site, or is missing images and style, these are all usually related to the same problem: you have the wrong domain name configured in your WordPress blog.

How to modify your .htaccess file

The .htaccess file contains directives (instructions) that tell the server how to behave in certain scenarios and directly affect how your website functions.

Redirects and rewriting URLs are two very common directives found in a .htaccess file, and many scripts such as WordPress, Drupal, Joomla and Magento add directives to the .htaccess so those scripts can function.

It is possible that you may need to edit the .htaccess file at some point, for various reasons.This section covers how to edit the file in cPanel, but not what may need to be changed.(You may need to consult other articles and resources for that information.)

There are Many Ways to Edit a .htaccess File

  • Edit the file on your computer and upload it to the server via FTP
  • Use an FTP program's Edit Mode
  • Use SSH and a text editor
  • Use the File Manager in cPanel

The easiest way to edit a .htaccess file for most people is through the File Manager in cPanel.

How to Edit .htaccess files in cPanel's File Manager

Before you do anything, it is suggested that you backup your website so that you can revert back to a previous version if something goes wrong.

Open the File Manager

  1. Log into cPanel.
  2. In the Files section, click on the File Manager icon.
  3. Check the box for Document Root for and select the domain name you wish to access from the drop-down menu.
  4. Make sure Show Hidden Files (dotfiles)" is checked.
  5. Click Go. The File Manager will open in a new tab or window.
  6. Look for the .htaccess file in the list of files. You may need to scroll to find it.

To Edit the .htaccess File

  1. Right click on the .htaccess file and click Code Edit from the menu. Alternatively, you can click on the icon for the .htaccess file and then click on the Code Editor icon at the top of the page.
  2. A dialogue box may appear asking you about encoding. Just click Edit to continue. The editor will open in a new window.
  3. Edit the file as needed.
  4. Click Save Changes in the upper right hand corner when done. The changes will be saved.
  5. Test your website to make sure your changes were successfully saved. If not, correct the error or revert back to the previous version until your site works again.
  6. Once complete, you can click Close to close the File Manager window.
<%@LANGUAGE="VBSCRIPT" CODEPAGE="1252"%> Untitled Document

Mold Intro
What is Mold
Mold Identity
Mold ID 2
Mold Handling
The Mold Dichotomy

Air Purifiers
Resources
Summary

NEW!!
Symptoms

The following three links are the work and research of another man and others. Although he would gladly give me permission to post his work, I'd rather direct everyone to his mold & fungal websites. Please read these things seriously, and never, never handle your moldy gourds without a mask. This is some serious stuff.

Mycotoxicosis
Mold-Help
Fungal Sinusitis

If you think you may have symptoms from exposure to mold, you can try joining the sickbuildings Yahoo group, lots of knolwedgable people that can help:
Sick Buildings

This has been a very time consuming research, if you appreciate and would like to support our efforts, donations are accepted:

 



Mold

Handling Molds

Disclaimer: This is not intended to be an educational instruction set for cleaning mold from your own home. I am simply repeating what we were told and sharing this information. If you have a mold problem in your home and choose to remediate it yourself, you do so at your own risk.

Some states have particular laws, Indiana has no current mold remediation requirements. In other words, if you have mold in your home, some states require you have a certified mold remediation company remove the mold, "Got Mold, call the Mold guy". In Indiana, this is not the case, however it is important to handle the molds properly and know a little bit about what you are dealing with.

We found mold in our house, and had the mold specialist for the county come in and verify the problem and tell us what to do. The first thing he did was peel the carpet back and say the carpet has to go. There was definitely mold in the carpet and on the hardwood floors underneath, (I prefer the hardwood floors anyway). Then he said, clean the floor with bleach water, about 10 parts water to 1 part bleach, and clean it good. Bleach will not kill mold, but it will sterilize the surface thus eliminating molds ability to grow, and it will remove what is there. The bleach water should be in a spray bottle, and spray the mold first, (taking precautions to ventilate against breathing too much bleach as this too can be dangerous). Damping or wetting the mold will weigh down and trap the mold spores with surface tension. Also, a an N45 industry standard mask should be worn during this process to reduce the breathing of spores.

Going into the crawl space, he said to locate the mold, if it is growing in what looks like grape clusters, "GET OUT", let a professional handle it, this is Stachybotrys, and you don't even want to go there with this mold. Again, the crawl space is handled as above. Clean and dry all wood, if the wood is permeated with mold and damaged, it may need replaced.

OK, with that little bit of handling advice, now lets apply this to gourds. As all gourd Growers and crafter's probably know, your gourd has mold on it and possibly in it. Before you grab that gourd, put your N45 mask on, (be sure to replace the filters regularly), and grab your spray bottle. You may not want to use a bleach solution on your gourd, though it shouldn't hurt it. UPDATE: I've been told that white vinegar is better than bleach as it will kill the spores, instead of spraying it, soak a towel or rag, and wrap it around your moldy gourd. If at all possible, clean your gourd outside!!! By toting that gourd into your house, you are releasing spores into your home, and doing so repeatedly you are increasing the concentration of spores which can be trapped in your carpet, (carpet is a wonderful filter for gathering and holding all kinds of allergens and spores for your enjoyment years down the road, especially when you vacuum), clothing, ventilation systems, and your furnace ducts. Once your gourd is well damped, then carry it to your cleaning spot, and clean it well. When you open your gourd and clean it out, be sure to have ventilation, (preferably an exhaust fan or fume hood of some type), and wear your mask.

Gourd dust can also be dangerous, about 1.5-2 years ago I thought I was going to die because I got to where I could not catch my breath no matter how hard I tried. It made living difficult at best, and I was terrified that I had possible gotten emphysema. We could not afford a doctor, so I started my own cardiovascular exercise routine and fortunately it began clearing out my lungs, enough so that I could feel a difference immediately. I still have some difficulty, but it is getting better. Do yourself a favor, a mask is cheap, your health is priceless.

This is a very brief and simple guideline to handling Molds, use common sense, you can't have too much ventilation, wear a mask, keep the mold damp and sterilize the surface, the dry it thoroughly.

UPDATE: Our efforts failed. We relandscaped and sealed the walls, this dried out the mold and caused massive sporulation. As summer turned into fall, the house had to be closed to keep it warm. We sealed off the space between the floors and the walls, taped off all vents including bathroom fans in an attempt to keep the mold from spreading through the house from the three contaminated outer walls, but all efforts failed. In fact, I was not as sensitized to the mold as the family was, I wore a respirator recommended for mold remediation and goggles, but I was still being affected. I am now nearly as sensitized to mold as the rest of my family. If you get mold, get out. Let the men in the space suits handle it.

If you didn't find it here, search the web:
Google

404 - PAGE NOT FOUND

ERROR 404 - PAGE NOT FOUND

Why am I seeing this page?

404 means the file is not found. If you have already uploaded the file then the name may be misspelled or it is in a different folder.

Other Possible Causes

You may get a 404 error for images because you have Hot Link Protection turned on and the domain is not on the list of authorized domains.

If you go to your temporary url (http://ip/~username/) and get this error, there maybe a problem with the rule set stored in an .htaccess file. You can try renaming that file to .htaccess-backup and refreshing the site to see if that resolves the issue.

It is also possible that you have inadvertently deleted your document root or the your account may need to be recreated. Either way, please contact your web host immediately.

Are you using WordPress? See the Section on 404 errors after clicking a link in WordPress.

How to find the correct spelling and folder

Missing or Broken Files

When you get a 404 error be sure to check the URL that you are attempting to use in your browser.This tells the server what resource it should attempt to request.

http://example.com/example/Example/help.html

In this example the file must be in public_html/example/Example/

Notice that the CaSe is important in this example. On platforms that enforce case-sensitivity example and Example are not the same locations.

For addon domains, the file must be in public_html/addondomain.com/example/Example/ and the names are case-sensitive.

Broken Image

When you have a missing image on your site you may see a box on your page with with a red X where the image is missing. Right click on the X and choose Properties. The properties will tell you the path and file name that cannot be found.

This varies by browser, if you do not see a box on your page with a red X try right clicking on the page, then select View Page Info, and goto the Media Tab.

http://example.com/cgi-sys/images/banner.PNG

In this example the image file must be in public_html/cgi-sys/images/

Notice that the CaSe is important in this example. On platforms that enforce case-sensitivity PNG and png are not the same locations.

404 Errors After Clicking WordPress Links

When working with WordPress, 404 Page Not Found errors can often occur when a new theme has been activated or when the rewrite rules in the .htaccess file have been altered.

When you encounter a 404 error in WordPress, you have two options for correcting it.

Option 1: Correct the Permalinks

  1. Log in to WordPress.
  2. From the left-hand navigation menu in WordPress, click Settings > Permalinks (Note the current setting. If you are using a custom structure, copy or save the custom structure somewhere.)
  3. Select  Default.
  4. Click Save Settings.
  5. Change the settings back to the previous configuration (before you selected Default). Put the custom structure back if you had one.
  6. Click Save Settings.

This will reset the permalinks and fix the issue in many cases. If this doesn't work, you may need to edit your .htaccess file directly.

Option 2: Modify the .htaccess File

Add the following snippet of code to the top of your .htaccess file:

# BEGIN WordPress
<IfModule mod_rewrite.c>
RewriteEngine On
RewriteBase /
RewriteRule ^index.php$ - [L]
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule . /index.php [L]
</IfModule>
# End WordPress

If your blog is showing the wrong domain name in links, redirecting to another site, or is missing images and style, these are all usually related to the same problem: you have the wrong domain name configured in your WordPress blog.

How to modify your .htaccess file

The .htaccess file contains directives (instructions) that tell the server how to behave in certain scenarios and directly affect how your website functions.

Redirects and rewriting URLs are two very common directives found in a .htaccess file, and many scripts such as WordPress, Drupal, Joomla and Magento add directives to the .htaccess so those scripts can function.

It is possible that you may need to edit the .htaccess file at some point, for various reasons.This section covers how to edit the file in cPanel, but not what may need to be changed.(You may need to consult other articles and resources for that information.)

There are Many Ways to Edit a .htaccess File

  • Edit the file on your computer and upload it to the server via FTP
  • Use an FTP program's Edit Mode
  • Use SSH and a text editor
  • Use the File Manager in cPanel

The easiest way to edit a .htaccess file for most people is through the File Manager in cPanel.

How to Edit .htaccess files in cPanel's File Manager

Before you do anything, it is suggested that you backup your website so that you can revert back to a previous version if something goes wrong.

Open the File Manager

  1. Log into cPanel.
  2. In the Files section, click on the File Manager icon.
  3. Check the box for Document Root for and select the domain name you wish to access from the drop-down menu.
  4. Make sure Show Hidden Files (dotfiles)" is checked.
  5. Click Go. The File Manager will open in a new tab or window.
  6. Look for the .htaccess file in the list of files. You may need to scroll to find it.

To Edit the .htaccess File

  1. Right click on the .htaccess file and click Code Edit from the menu. Alternatively, you can click on the icon for the .htaccess file and then click on the Code Editor icon at the top of the page.
  2. A dialogue box may appear asking you about encoding. Just click Edit to continue. The editor will open in a new window.
  3. Edit the file as needed.
  4. Click Save Changes in the upper right hand corner when done. The changes will be saved.
  5. Test your website to make sure your changes were successfully saved. If not, correct the error or revert back to the previous version until your site works again.
  6. Once complete, you can click Close to close the File Manager window.

   

Untitled Document

Important Notice: The information presented here is for educational purposes only. We cannot guarentee personal health or safety on any proceedures used or mentioned, the sole purpose is to make you aware of potential hazards, it is up to the individual to determine the best choices for them. I am not a licensed mold remediator, and the information given within these pages are my own opinion based on my research. Nothing contained here should be considered to constitute medical advice in any way. Always consult your licensed medical care provider for advice about your health and medical needs.

Page last updated 7/11/05

Digital Graphics and web design for The Gourd Reserve™ by Dan & Carmella Dunkin

© 2003 The Gourd Reserve